|
|
|
National Stock Number:
5315-12-191-5952
Federal Supply Class:
5315
National Item Identification Number:
121915952
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 2X18DIN1473A3B | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1473-2X18-ST-A3B | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1473-2X18-ST-ZN8MTCB | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-191-5952 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| FIRST END LOCATION | OVAL END | | FIRST END OUTER RADIUS | 2,0 MILLIMETERS NOMINAL | | FIRST END STYLE | OVAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28K ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OVERALL | | PIN LARGE END DIAMETER | 2,15 MILLIMETERS MINIMUM AND 2,2 MILLIMETERS MAXIMUM | | PIN SMALL END DIAMETER | 2,0 MILLIMETERS NOMINAL AND 1,975 MILLIMETERS MINIMUM AND 2,0 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 18,0 MILLIMETERS NOMINAL AND 17,83 MILLIMETERS MINIMUM AND 18,67 MILLIMETERS MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 15,0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0,9 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | STYLE DESIGNATOR | FULL LENGTH GROOVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267TEIL9, SCHLUESSEL A3B ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE ZINC OVERALL | | TEST DATA DOCUMENT | D8286-DIN1473/NOV78/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|