|
|
|
National Stock Number:
5315-12-198-3715
Federal Supply Class:
5315
National Item Identification Number:
121983715
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| B12H11X30DIN1444-ST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | B12H11X30DIN1444-ST-ZN8CX | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | B12H11X30DIN1444STGALZN8C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1444-B12H11X30-ST-A3P | C3689 | MBO OSSWALD GMBH & CO. KG | | DIN1444-B12H11X30-ST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-198-3715 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| HEAD STYLE | FLAT CHAMFER | | HEIGHT | 3,850 MILLIMETERS MINIMUM AND 4,150 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28K ASSN STD 1ST MATERIAL RESPONSE OR DIN1654/17240, CQ35 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OR STEEL COMP 1.1172 OVERALL | | PIN HEAD DIAMETER | 19,48 MILLIMETERS MINIMUM AND 20,00 MILLIMETERS MAXIMUM | | PIN CHAMFER ANGLE | 30,0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267TEIL9, SCHLUESSEL A3P ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE ZINC OVERALL | | TEST DATA DOCUMENT | D8286-DIN1444/MAR74/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDER HEAD LENGTH | 30,0 MILLIMETERS NOMINAL AND 29,58 MILLIMETERS MINIMUM AND 30,42 MILLIMETERS MAXIMUM | | DIAMETER | 12,0 MILLIMETERS NOMINAL AND 11,890 MILLIMETERS MINIMUM AND 12,000 MILLIMETERS MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5,50 MILLIMETERS NOMINAL | | CHAMFER LENGTH | 3,00 MILLIMETERS NOMINAL | | FIRST HOLE DIAMETER | 3,20 MILLIMETERS MINIMUM AND 3,38 MILLIMETERS MAXIMUM |
|
|