|
|
|
National Stock Number:
5315-12-312-4539
Federal Supply Class:
5315
National Item Identification Number:
123124539
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| DIN1473-10X45-ST-A2P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 123124539 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | NO PRIMARY REF12-312-4539 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| FIRST END LOCATION | OVAL END | | FIRST END OUTER RADIUS | 10,0 MILLIMETERS NOMINAL | | FIRST END STYLE | OVAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28 K ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OVERALL | | PIN LARGE END DIAMETER | 10,3 MILLIMETERS MINIMUM AND 10,4 MILLIMETERS MAXIMUM | | PIN SMALL END DIAMETER | 10,0 MILLIMETERS NOMINAL AND 9,910 MILLIMETERS MINIMUM AND 10,0 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 45,0 MILLIMETERS NOMINAL AND 45,7 MILLIMETERS MINIMUM AND 46,7 MILLIMETERS MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 15,0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 3,5 MILLIMETERS NOMINAL | | SECOND END TIP RADIUS | 1,2 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | STYLE DESIGNATOR | FULL LENGTH GROOVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267TEIL9, SCHLUESSEL A2P ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE ZINC OVERALL | | TEST DATA DOCUMENT | D8286-DIN1473/NOV78/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|