|
|
|
National Stock Number:
5315-12-324-2779
Federal Supply Class:
5315
National Item Identification Number:
123242779
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10503412 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | 10503412REVA | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | DIN1436-16H11X55X50-ST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1436-16H11X55X50-ST50-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1436-16H11X55X50ST-A3L | 0GD25 | ALLIED DEFENSE INDUSTRIES, LLC | | DIN1436-16H11X55X50ST5DA3L | 0GD25 | ALLIED DEFENSE INDUSTRIES, LLC | | NO PRIMARY REF 12-324-2779 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | NO PRIMARY REF 123242779 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 16,0 MILLIMETERS NOMINAL AND 15,890 MILLIMETERS MINIMUM AND 16,000 MILLIMETERS MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5,00 MILLIMETERS NOMINAL | | CHAMFER LENGTH | 2,50 MILLIMETERS NOMINAL | | FIRST HOLE DIAMETER | 4,00 MILLIMETERS MINIMUM AND 4,30 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 4,625 MILLIMETERS MINIMUM AND 5,375 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28K ASSN STD 1ST MATERIAL RESPONSE OR DIN1654/17240, CQ35 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OR STEEL COMP 1.1172 OVERALL | | PIN HEAD DIAMETER | 27,35 MILLIMETERS MINIMUM AND 28,65 MILLIMETERS MAXIMUM | | PIN CHAMFER ANGLE | 30,0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267TEIL9, SCHLUESSEL A3P ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE ZINC OVERALL | | TEST DATA DOCUMENT | D8286-DIN1436/NOV78/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDER HEAD LENGTH | 55,0 MILLIMETERS NOMINAL AND 54,40 MILLIMETERS MINIMUM AND 55,60 MILLIMETERS MAXIMUM |
|
|