|
|
|
National Stock Number:
5315-12-324-9794
Federal Supply Class:
5315
National Item Identification Number:
123249794
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10552706 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | 10552706 | 94223 | SPAENAUR INC DBA SPAENAUR INC. | | DIN1434-6H11X22X19,5-ST-A2L | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1434-6H11X22X19,5-ST50-A2L | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-324-9794 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | NO PRIMARY REF 123249794 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 6,0 MILLIMETERS NOMINAL AND 5,925 MILLIMETERS MINIMUM AND 10,000 MILLIMETERS MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2,50 MILLIMETERS NOMINAL | | CHAMFER LENGTH | 1,50 MILLIMETERS NOMINAL | | FIRST HOLE DIAMETER | 1,60 MILLIMETERS MINIMUM AND 1,85 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 1,475 MILLIMETERS MINIMUM AND 1,625 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28K ASSN STD 1ST MATERIAL RESPONSE OR DIN1654/17240, CQ35 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OR STEEL COMP 1.1172 OVERALL | | PIN HEAD DIAMETER | 8,64 MILLIMETERS MINIMUM AND 9,00 MILLIMETERS MAXIMUM | | PIN CHAMFER ANGLE | 30,0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267TEIL9, SCHLUESSEL A2L ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE ZINC OVERALL | | TEST DATA DOCUMENT | D8286-DIN1434/FEB77/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDER HEAD LENGTH | 22,0 MILLIMETERS NOMINAL AND 21,58 MILLIMETERS MINIMUM AND 22,42 MILLIMETERS MAXIMUM |
|
|