|
|
|
National Stock Number:
5315-12-341-1717
Federal Supply Class:
5315
National Item Identification Number:
123411717
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 462-206073.001 | D1785 | HENSCHEL WEHRTECHNIK GMBH | | 462-206073.001 | D9448 | RHEINMETALL LANDSYSTEME GMBH | | 9865969 | D1785 | HENSCHEL WEHRTECHNIK GMBH |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 8,0 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 174,0 MILLIMETERS NOMINAL | | FIRST END TAPER ANGLE | 45,0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 2,0 MILLIMETERS NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 4,0 MILLIMETERS NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH ENDS DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17115, ST52-3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0841 OVERALL | | PIN OVERALL DIAMETER | 15,0 MILLIMETERS NOMINAL | | PIN OVERALL LENGTH | 190,0 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 8,0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | MIT EINER BOHRUNG 4 MILLIMETER DURCHMESSER, 19 MILLIMETER VOM ENDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN50961, FE/ZN12C ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL |
|
|