|
|
|
National Stock Number:
5315-12-349-8474
Federal Supply Class:
5315
National Item Identification Number:
123498474
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10502252 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | DIN1436-10H11X25X21-ST50 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-349-8474 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 10,0 MILLIMETERS NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5,0 MILLIMETERS NOMINAL | | CHAMFER LENGTH | 2,0 MILLIMETERS NOMINAL | | FIRST HOLE DIAMETER | 3,20 MILLIMETERS MINIMUM AND 3,50 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 4,0 MILLIMETERS NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28K ASSN STD 1ST MATERIAL RESPONSE OR DIN1654/17240, CQ35 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OR STEEL COMP 1.1172 OVERALL | | PIN HEAD DIAMETER | 20,0 MILLIMETERS NOMINAL | | PIN CHAMFER ANGLE | 30,0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN50942, VERFAHREN ZNPHR 10F ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL | | UNDER HEAD LENGTH | 25,0 MILLIMETERS NOMINAL |
|
|