5340-00-150-2488, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-00-150-2488

Federal Supply Class:
5340

National Item Identification Number:
001502488

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

690549	03730	GOULD E A AND CO
690549	11449	TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP
690549	77445	RTX CORPORATION

Techincal Specification:

CENTER SECTION THICKNESS	0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
CENTER SECTION WIDTH	0.500 INCHES NOMINAL
FABRICATION METHOD	FORMED
FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
FIRST LEG HOLE DIAMETER	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.500 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL
FIRST LEG STYLE	CORNER RADIUS
FIRST LEG THICKNESS	0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
FIRST LEG WIDTH	2.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 410
SECOND LEG CORNER RADIUS	0.156 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
SECOND LEG HOLE DIAMETER	0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL
SECOND LEG WIDTH	0.500 INCHES NOMINAL
SECOND LEG STYLE	CORNER RADIUS
SECOND LEG THICKNESS	0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
STYLE DESIGNATOR	DOUBLE ANGLE

Click here to Register for Free 30-day Trial