| CENTER SECTION HEIGHT | 1.324 INCHES MINIMUM AND 1.344 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| FABRICATION METHOD | FORMED |
| FIRST LEG ANGLE | 83.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 |
| SECOND LEG ANGLE | 120.0 DEGREES NOMINAL |
| SECOND LEG END RADIUS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |