| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.016 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7947,COND A MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1095 |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 2ND LEG HAS FOUR HOLES IRREGULARLY SPACED |
| SECOND LEG CORNER RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.770 INCHES MINIMUM AND 1.830 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.830 INCHES MINIMUM AND 2.110 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.016 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |