| FIRST LEG LENGTH | 1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.080 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 COND 0 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, DIFFUSER SUPPORT |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.080 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.680 INCHES MINIMUM AND 2.740 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| STYLE DESIGNATOR | OFFSET ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE 1A, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.610 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES NOMINAL |
| FIRST LEG ANGLE | 79.0 DEGREES MINIMUM AND 81.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.360 INCHES NOMINAL |