| FIRST LEG ANGLE | 0.12 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.870 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.380 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 1.005 INCHES MINIMUM |
| FIRST LEG LENGTH | 3.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, DIAGNOSTIC CONNECTOR |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.406 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 3.625 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.870 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.380 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | HOLES ON FIRST LEG ARE DIFFERENT SIZES; SMALLER ONE IS 1.005-1.015 THRU, CENTERED 0.870 FROM LEFT EDGE AND 1.250 FROM BOTTOM EDGE; OTHER HOLE IS 1.759-1.769 THRU, 4.120 FROM LEFT EDGE AND 1.250 FROM BOTTOM EDGE |
| STYLE DESIGNATOR | ANGLE |