|
|
|
National Stock Number:
5365-12-198-8778
Federal Supply Class:
5365
National Item Identification Number:
121988778
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 06.15114.0256 | D3273 | MAN TRUCK & BUS AG | | 06151140256 | D3273 | MAN TRUCK & BUS AG | | 100X120X0,2DIN988 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN988-100X120X0,2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | PS100X120X0,2 | D8090 | SEEGER-ORBIS GMBH & CO. OHG |
|
Techincal Specification:
| APERTURE DIAMETER | 100.12 MILLIMETERS MINIMUM AND 100.47 MILLIMETERS MAXIMUM | | CONSTRUCTION | ONE-PIECE | | MATERIAL | STEEL COMP 1.0330 | | OUTSIDE DIAMETER | 119.53 MILLIMETERS MINIMUM AND 119.88 MILLIMETERS MAXIMUM | | OVERALL THICKNESS | 0.16 MILLIMETERS MINIMUM AND 0.20 MILLIMETERS MAXIMUM | | STYLE DESIGNATOR | CIRCULAR | | TEST DATA DOCUMENT | D8286-DIN988/MAERZ90/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|