|
|
|
National Stock Number:
5905-00-819-9872
Federal Supply Class:
5905
National Item Identification Number:
008199872
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 200L53-103 | 80294 | BOURNS INSTRUMENTS INC | | 730925-010 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SHAFT BEARING TYPE | BEARING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 20.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY LENGTH | 1.172 INCHES MAXIMUM | | BODY WIDTH | 0.290 INCHES MAXIMUM | | BODY HEIGHT | 0.340 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.435 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | OVERALL HEIGHT | 1.265 INCHES NOMINAL | | OVERALL WIDTH | 0.290 INCHES NOMINAL |
|
|