|
|
|
National Stock Number:
5905-01-097-9864
Federal Supply Class:
5905
National Item Identification Number:
010979864
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 300-2317 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3300P-642-102 | 32997 | BOURNS INC | | SMC447469-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 280.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 75.0 SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 8.00 INCH-OUNCES | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.00 TO 5.00 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.500 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|