|
|
|
National Stock Number:
5935-00-823-0487
Federal Supply Class:
5935
National Item Identification Number:
008230487
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 07-125-05 | 99592 | RAYTHEON COMPANY | | 114-109-0002 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 357-9109-00 | 13499 | ROCKWELL COLLINS, INC. | | 357-9292-000 | 95104 | ALCATEL-LUCENT HOLDINGS INC. | | 357-9292-000 | 95105 | ROCKWELL COLLINS, INC. | | 242203100009 | H0673 | ALCATEL-LUCENT NETWORK SYSTEMS | | 946087-8851 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 946087-8851 | 13973 | LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION | | UG88EU | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | 4118710-017 | 82577 | RAYTHEON COMPANY | | MS35168-88E | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | UG88EU | D9422 | FCI DEUTSCHLAND GMBH |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING | | CABLE ENTRANCE DIAMETER | 0.223 INCHES NOMINAL | | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT | | CONNECTOR LOCKING METHOD | BAYONET LATCH | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-B-612 COMP 11 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | WEATHERPROOF | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | OVERALL LENGTH | 1.125 INCHES NOMINAL | | MATING END QUANTITY | 1 | | OVERALL DIAMETER | 0.562 INCHES NOMINAL | | PRECIOUS MATERIAL AND LOCATION | CONTACT AND BODY SURFACES SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.105 SILVER GRAINS, TROY | | PRECIOUS MATERIAL | SILVER | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | SILVER | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-25955 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MILC3608 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|