| DUTY TYPE | INTERMITTENT |
| ARC QUENCHING METHOD | AIR |
| AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 6.0 AMPERES DC RESISTIVE LOAD |
| AUXILIARY CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 32.0 DC |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 35.0 MILLIMETERS NOMINAL SINGLE MOUNTING FACILITY |
| COIL QUANTITY | 1 |
| ENVIRONMENTAL PROTECTION | DUST TIGHT AND SUBMERSIBLE |
| FEATURES PROVIDED | POLARIZED |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 24.0 DC |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 100.0 AMPERES DC RESISTIVE LOAD |
| III CUBIC MEASURE | 242.05 CUBIC CENTIMETERS |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| NONPILE-UP AUXILIARY CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| NONPILE-UP MAIN CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED |
| OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 24.0 VOLTS DC 20 DEG CELSIUS ALL WINDINGS |
| OVERALL DIAMETER | A50.0 MILLIMETERS NOMINAL |
| OVERALL HEIGHT | 94.0 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 50.0 MILLIMETERS NOMINAL |
| PURPOSE FOR WHICH DESIGNED | SPECIFIC |
| SPECIAL FEATURES | OPERATING VOLTAGES REEL; 18-32V DC, CUT-OFF DIODE 26.08.50 VERSE NR 5961-12-190-1428 PARALLEL TO REEL MOUNTING PLATE MAIN CONTACT MT, CONNECTIONS REEL WITH SCREW M4X6 DIN 84, SPREAD THE MOUNTING STRAP; 22 MM, OVERLOAD; 1000A FOR 1 SEC., 200A FOR 20 SEC., INSTALLATION POSITION; ARBITRARY, TEMPERATURE RANGE, -55 TO +74 DEGREES CELSIUS, ENCLOSURE AFTER INTERNATIONAL ELECTRONICAL COMMISSION 529, INTERIOR IP 67 TO 0.67 BAR 1 MINUTS, PORTS IP 00 |
| WINDING DC RESISTANCE RATING | 159.5 OHMS MAXIMUM SECOND WINDING |
| WINDING QUANTITY | 2 |
| TERMINAL TYPE AND QUANTITY | 2 SCREW CONTACTS |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD ENERGIZING ELEMENT |
| UNPACKAGED UNIT WEIGHT | 0.44 KILOGRAMS |
| UNTHREADED MOUNTING HOLE DIAMETER | 5.5 MILLIMETERS NOMINAL SINGLE MOUNTING FACILITY |