| DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 20,0 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 33,75 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 12,0 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90,0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| COLOR | BLACK |
| ENVIRONMENTAL PROTECTION | ANY ACCEPTABLE |
| FLEXIBILITY | FLEXIBLE |
| HEAT SHRINKAGE RATING IN PERCENT | 75,0 |
| HEIGHT | 27,0 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 1,5 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 14,5 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 30,0 MILLIMETERS MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 30,0 MILLIMETERS MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 6,0 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| RELIABILITY INDICATOR | ESTABLISHED |
| SMALL END WALL THICKNESS OF MAIN BODY | 0,8 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| TEMP RATING | 150,0 DEG CELSIUS |
| TEST DATA DOCUMENT | D9477-VG95343-2/ SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND D9477-VG95343-06TYP:E SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |